Tuesday, 17 November 2015

Chunky crochet fingerless mittens - free top down pattern

Free pattern for fingerless gloves
Here is the free pattern, tutorial and instructions for my chunky crochet fingerless mittens. I have made mine in Katia Azteca in a gorgeous red (shade no 7809). Azteca is classed as an aran weight yarn but you can use any chunkyish yarn as long as the gauge works out as 14 stitches and 8 rows in treble equals four inches.

A good suggested substitute yarn is Rico Creative Melange Chunky which crochets up to the same gauge.

The pattern really is quite easy to do. Most of the stitches are just UK trebles. The ribbing effect also uses trebles but instead of ordinary trebles, we use front post trebles (fprt) alternated with back post trebles (bptr). The thumb and shaping might look daunting for beginners but I walk you through that bit using detailed instructions and photographs so you know what it should look like.

I think this is a perfect pattern for a beginner looking to expand their stitch repertoire. If you can do chains, slip stitches and trebles, all you have to do before trying this pattern is to look up how to do the front and back post trebles and familiarise yourself with 2trtog for shaping. An explanation of how to do 2trtog is included in the pattern abbreviations below.

Here is a link to a video guide of how to do front post treble (FPtr)
NB, the video is made using American terms which is why they could it a front post double but don't worry about that, just follow the video and do it exactly as its shown.

Here is a link to a video guide of how to do back post treble (BPtr)

We're making these mittens top down, so we start at the fingers end and finish at the wrist

All instructions use UK crochet terminology

MATERIALS

60 grams Katia Azteca (108 metres/119 yards)
5.5mm hook

GAUGE

14 stitches and 8 rows in trebles = 4 inches

ABBREVIATIONS (UK terminology)

ch chain
ss slip stitch
st stitch
tr treble
FPtr front post treble
BPtr back post treble
2trtog 
yoh yarn over hook

Here is an explanation for 2trtog:
The stitch is worked as follows over two sts and joins two trs at the top to reduce the stitch count by one
yoh, insert hook into first st, yoh, pull yarn through first st (3 loops on hook), yoh, pull yarn through first two loops (2 loops on hook) yoh, insert hook into second st, yoh, pull yarn through st (4 loops on hook), yoh, pull yarn through 2 loops (3 loops on hook), yoh, pull loop through remaining 3 loops (1 loop on hook)

INSTRUCTIONS

Foundation row: ch 26, ss into first ch to form a circle

Row 1: ch 3 (to count as first tr), tr in each ch all round, ss into top ch of beginning 3 ch (26 trs)

Row 2: ch 2 (counts as first tr), FPtr in next st, *BPtr in next st, FPtr in next st, repeat from * to end, ss into top ch of beginning 2 ch (26 sts)

Row 3: Repeat row 2

Row 4: ch 3 (counts as 1 tr), 1 tr in each st all round, 1 tr into st at the base of 3 ch, ss into top ch of beginning 3 ch (27 trs)

Row 5: ch 8,

 skip next 2 sts, ss into next st to form a semi-circle,

ch 3 (counts as first tr),

tr in each of next 23 stitches, 1 tr into base of st where semi-circle starts (25 trs),

1 tr in each ch of 8 ch, (photo below indicates where first tr should go)

(the photo below shows what it looks like half way through the 8 trs)

(the photo below shows what it looks like when you've completed all 8 trs and where to put the next ss)

ss into top of beginning 3 ch (33 trs)

Row 6: ch 3 (counts as 1 tr), 1 tr in next 27 trs, 2trtog, 1 tr in each of next 3 sts, ss in top ch of beginning 3 ch (32 sts)

Row 7: ch 3 (counts as 1 tr) , 1 tr in next 27 sts, 2trtog, 1 tr in each of next 2 sts, ss in top ch of beginning 3 ch (31 sts)

Row 8: ch 3 (counts as 1 tr), 1 tr in next 27 sts, 2trtog, 1 tr in next st, ss in top ch of beginning 3 ch (30 sts)

Row 9: ch 3 (counts as 1 tr), 1 tr in next 27 sts, 2trtog, ss in top ch of beginning 3 ch (29 sts)

Row 10: ch 3, 1 tr in each of next 26 sts, 2trtog, ss in top ch of beginning 3 ch (28 sts)

Row 11: ch 3, 1 tr in each of next 25 sts, 2trtog, ss in top ch of beginning 3 ch (27 sts)

Row 12: 2 ch, yoh, insert hook in next st, yoh, pull loop through st (3 loops on hook), yoh, pull yarn through 2 loops (2 loops on hook), yoh, pull yarn through 2 loops (counts as 2trtog), 1 tr in each of next 12 sts, 2trtog, 1 tr in each of next 9 sts, 2trtog, ss in top of beginning 2trtog (24 sts)

Row 13: 3 ch (counts as 1 tr), 1 tr in all sts all round, ss in top ch of beginning 3 ch (24 trs)

Row 14: 2 ch, FPtr in next st *BPtr in next st, FPtr in next st repeat from * to end, ss in top ch of beginning 2 ch (24 sts)

Row 15: repeat row 14

Row 16: repeat row 14, fasten off and weave in ends

Both mittens are the same, make two. 


Edit: There is now a matching chunky ribbed scarf pattern 


11 comments:

  1. Hi I am having ago at doing these gloves and just wanted to make sure I have completed round 4 right. When you say the base of the chain 3 do you mean the first stitch of the chain or do you mean where I slip stitched on the previous row ?

    ReplyDelete
  2. Hi Amanda, thanks so much for choosing my pattern! The treble needs to go right into the base stitch of the previous round, it’s slightly to the left and below your slip stitch. The important thing is to increase the stitch count by one so it could also go into the slip stitch if you feel more comfortable putting it there. With chunky yarn, it won’t make much difference. Good luck with finishing your mittens!

    ReplyDelete
  3. Hi Sue i was wanting to make a scarf in this pattern to match the gloves with the front post and back post stitches and I was wondering do you have a scarf pattern like the gloves please ? Xx

    ReplyDelete
  4. Hi Sue do you have a scarf pattern to match these gloves please ? Also how can i send you a picture of the finished gloves too ?

    ReplyDelete
  5. Hi Amanda, I do have a pattern which i’m In the process of doing a tutorial with photos for. I just tried to put the text instructions here but it’s not worked (think it was too long!) I will do a new blog entry in a few minutes time.
    On the photograph, if you have a Ravelry account, you could do it as one of your projects and then I could see or you could email it to me.

    ReplyDelete
  6. The scarf pattern is now at the URL below
    https://soozjewels.blogspot.co.uk/2018/01/chunky-ribbed-crochet-scarf-pattern.html
    I’ll be adding more photographs soon

    ReplyDelete
  7. Will you be doing a beanie to go with this too xxx

    ReplyDelete
    Replies
    1. You like to work me hard, Amanda! :-) actually there’s no need. I designed these gloves to match a hat I had made using someone else’s pattern. It’s on Ravelry (free) called Shanti Hat by Robyn Devine. In the pattern, it’s a slouchy hat but I did fewer rows to make it a tighter fit like a beanie. Xx

      Delete
  8. Hi Sue I am just letting you know that i have finished the chunky fingerless mittens and I have posted photos in my projects on raverly xx

    ReplyDelete
    Replies
    1. Marvellous! I just saw the picture, thank you. Good luck with the scarf!

      Delete
  9. Hi Sue I made your fingerless gloves back in 2018 and my friend that I made them for recently asked me to put a flap on them to make them into a mitten what is the easiest way to do this please ?

    ReplyDelete

Thanks so much for visiting, I love it when people leave me messages!